Filter
Top Products
USING THE ACCESSORIES
ADJUSTABLE FLAT
BASKET
1. Squeeze the two metal tabs
on the Adjustable Flat
Basket Cover and remove.
See Figure 4. Set Cover
aside.
2. Place food into Basket.
Place food flat; do not
“stack” food.
3. Replace Basket Cover so it
fits TIGHTLY against food.
(The Cover will "hold" the
food in place as it turns. The
cover can be adjusted up or
down to accommodate the
thickness of the food. See
Figure 5.
4. WITHOUT TURNING THE
ROTISSERIE ON YET, use
the Cover Handles to raise
the Cover.
5. Hold the Adjustable Basket
Assembly so the small gear
faces to the right. Slide it into
the Rotisserie along the
Rotisserie Bar Assembly
Track. Make sure each end
of the Adjustable Basket
Assembly drops into the center grooves of the Rotisserie Bar
Track.
Figure 4
Figure 5
1320
User Maintenance Instructions
WARNING: Do not attempt to disassemble or clean the unit
while it is plugged in and/or is hot. Burns or other serious
injuries can occur.
Your Baby George
™
Rotisserie requires little maintenance. It con-
tains no user-serviceable parts inside the Rotisserie. Contact con-
sumer service if the product requires servicing.
CAUTION: Unplug appliance from wall outlet and allow all
parts to cool completely before cleaning.
CAUTION: Do not use metal or abrasive scouring pads or
harsh or abrasive cleansers to clean the parts of the
Rotisserie. If necessary, use a nylon bristle brush to loosen
hardened food particles.
1. Once product is unplugged and has cooled completely, carefully
pull out Drip Tray. Use care not to spill any liquids as they may
still be hot.
2. Remove all accessories from Rotisserie. Wash all accessories in
hot, soapy water. Rinse well and dry thoroughly.
3. Wipe outside of Rotisserie with a damp cloth or sponge. Dry
with a soft cloth.
4. Lift open Cover. If desired and to make cleaning easier, you may
also lift open the Cover completely, then pull up and remove
Cover to release from tracks. Use a damp sponge to wipe the
interior of the Rotisserie. Do not use metal or abrasive scour-
ing pads or harsh or abrasive cleansers to clean inside the
Rotisserie. Dry all parts thoroughly. If Cover is removed,
replace into tracks on sides of Rotisserie and close Cover.
Preparing for Use (Cont.)