Filter
Top Products
12
5. WITHOUT TURNING THE ROTISSERIE ON YET, use the
Cover Handles to lift open the Cover.
6. Hold the Rotisserie Bar Assembly so
the End Wheel with the small gear
faces to the right. Slide the Rotisserie
Bar into the Rotisserie along the
Rotisserie Bar Assembly Track. See
Figure 1. Allow each end of the
Rotisserie Bar Assembly to drop into
the center grooves in the Rotisserie
Bar Track. Be sure the Rotisserie Bar
Assembly is seated properly in Track
Grooves.
Assemble Drip Tray
1. If not in place, slide Drip Tray into
position as shown in Figure 2.
Insert Reflector
1. Grasp the Handle and slide the
Reflector behind the elements. See
Figure 3. Make sure the metal hooks
catch on the element brackets. The
bottom of the Reflector will angle over
the Drip Tray.
Placing Accessories onto
Rotisserie Bar Assembly
1. Determine which accessory you will
use with the Rotisserie Bar Assembly
(Adjustable Flat Basket, Air Bake
Round Basket, or Skewers).
2. If the Rotisserie was previously used, be sure all parts have
cooled. Remove Rotisserie Bar Assembly from inside Rotisserie.
3. Follow steps 3-4 under “Rotisserie Bar Assembly.”
4. Locate the instructions on the following pages for the accessory
you wish to use. Follow the appropriate steps for placing the
accessory onto the Rotisserie Bar Assembly.
5. Once accessory is secure on Rotisserie Bar Assembly, position
the Removable End Wheel over the pointed meat tines and
firmly push the assembly together.
6. Follow steps 5-6 under “Rotisserie Bar Assembly” to place
Rotisserie Bar Assembly/Accessory into Roti
sserie.
Preparing for Use (Cont.)
REMOVABLE
END WHEEL
Figure 1
Figure 2
Figure 3