Filter
Top Products
5
INTERIOR LIGHT
The light comes on automatically when the door is opened.
To replace the light bulb, turn the temperature control to
OFF and unplug the electrical cord. Replace the old bulb
with a bulb of the same wattage.
ADJUSTABLE INTERIOR SHELVES
Multi-position
adjustable interior
shelves can be
moved to any
position for larger or
smaller packages.
The shipping
spacers that
stabilize the shelves
for shipping should
be removed and
discarded.
AUTOMATIC FREEZE CONTROL
The Freeze Control Feature will maintain proper interior
refrigerator temperature even when the refrigerator is
placed in an area where the surrounding temperature drops
down to 10° F (-12° C).
COOL DOWN PERIOD
For safe food storage, allow 4 hours for the refrigerator to
cool down completely. The refrigerator will run continuously
for the first several hours.
TEMPERATURE CONTROL
The temperature control is located inside the refrigerator. The
temperature is factory preset to provide satisfactory food
storage temperatures. However, the temperature control is
adjustable to provide a range of temperatures for your
personal satisfaction. If a colder temperature is desired, turn
the temperature control knob toward COLDEST and allow
several hours for temperatures to stabilize between adjustments.
DOOR REMOVAL
If door must be removed to fit through narrow doorways:
1. Gently lay refrigerator on its back, on a throw rug or
blanket.
2. Remove the base panel by unscrewing two screws
from front of base panel.
3. At the top of the cabinet, lift up plastic hinge cover, and
fold back. (Figure 1)
4. Use a Phillips® screwdriver to loosen and retighten
the screws on the top hinge to ensure a secure
assembly, and prevent hinge slippage.
5. Remove the top hinge from cabinet, and lift door off
lower hinge pin.
6. After door is removed, remove the two screws from the
bottom hinge.
7. To replace door, reverse above order.
Refrigerator Door Adjustments
Figure 1
• Install the refrigerator in the coolest part of the room,
out of direct sunlight and away from heating ducts or
registers. Do not place the refrigerator next to heat-
producing appliances such as a range, oven or
dishwasher.
• Level the refrigerator so the doors close tightly.
• Do not overcrowd the refrigerator or block cold air
vents. Doing so causes the refrigerator to run longer
and use more energy. Shelves should not be lined with
aluminum foil, wax paper or paper toweling. Liners
interfere with cold air circulation, making the refrigerator
less efficient, which could cause food spoilage.
• Cover foods and wipe containers dry before placing
them in the refrigerator. This cuts down on moisture
build-up inside the unit.
• Organize the refrigerator to reduce door openings.
Remove as many items as needed at one time and
close the door as soon as possible.
SETTING THE TEMPERATURE CONTROL
REFRIGERATOR FEATURES
Adjustable Interior Shelves
ENERGY SAVING TIPS