Gilson 59015C Mixer User Manual


 
2
1-SAFETY PRECAUTIONS
THE FOLLOWING PRECAUTIONS ARE SUGGESTED TO HELP
PREVENT ACCIDENTS. A CAREFUL OPERATOR IS THE BEST
OPERATOR. MOST ACCIDENTS CAN BE AVOIDED BY OBSERVING
CERTAIN PRECAUTIONS. READ AND TAKE THE FOLLOWING
PRECAUTIONS BEFORE OPERATING THIS EQUIPMENT TO HELP
PREVENT ACCIDENTS. EQUIPMENT SHOULD BE OPERATED ONLY BY
THOSE WHO ARE RESPONSIBLE AND INSTRUCTED TO DO SO.
§ Read all mixer and electric motor/engine instructions before operation.
§ Use a grounded, three wire plug-in for all mixers using an electric motor or an
electric starting engine.
§ Do not use mixer in standing water if powered by an electric motor or an electric
starting engine.
§ Do not over-fill the mixer. There should not be any liquid running out of the mixer
drum.
§ Know how to stop the motor/engine instantly.
§ Keep hands and feet away from all moving parts.
§ If you are unfamiliar with the mixer, test run the empty mixer prior to actual use.
§ Never charge or fill unit prior to starting, as the over-load initially encountered could
damage the motor/engine.
§ Stop motor/engine whenever you leave or clean the unit. Disconnect power cord on
electric motor.
§ Never operate mixer without guards being properly positioned and secure.
§ Avoid spilling gasoline. Never fill tank while the engine is running or while you are
smoking.
§ Open doors if engine is running in an enclosed area. Exhaust fumes are dangerous.
§ Store gasoline in safe container. Store the container in a cool, dry place. Do not
keep in the house or near heating appliances.
§ Never reach into drum while mixer is running.
§ Keep mixer in good operating condition. Loose or damaged parts are dangerous and
should be tightened or replaced before operating.
§ Keep bystanders, especially children, away from mixer while operating.