Filter
Top Products
6 312348B
5. Softly tap seal into bore until it bottoms out.
6. Insert bushing into bore; make sure larger outside
diameter faces seal and smaller outside diameter
faces plate.
7. Assemble gasket and back plate to block using sup-
plied screws.
8. Assemble throat seal installation tool on to end of
piston rod.
9. Insert piston rod and seal tool through throat seal on
front of block.
F
IG. 9: Tap Seal
F
IG. 10: Insert Bushing
For A-side pumps that are 80 or smaller, a plate
adapter is required.
TI9100a
Resin Throat Bushing
ISO Throat Bushing
Grease Hole
TI9101a
TI9102a
FIG. 11: Assemble Gasket and Back Plate
Clevis end of piston rod may need to be removed to
perform this step.
F
IG. 12: Throat Seal Installation Tool
F
IG. 13: Insert Rod through Throat Seal
TI9103a
TI9104a
Installation Tool
TI9105a