Filter
Top Products
307296 3
Installation
Typical Mountings
See Fig. 1 for typical mountings. See page 14 for the
mounting hole layout.
Install the surge tank or filter near the pump outlet.
Position the surge tank so the labels face away from
the pump and so the setscrews, near the top and
bottom of the tank, face toward the pump.
The top of the surge tank must always be supported.
See Accessories on page 13 for mounting clamps.
Surge tanks must always be mounted upright, as
shown in Fig. 1, not horizontally.
05912
05910
Detail A: With Riser Tube
Detail C: Integral Riser Tube
Detail B: No Riser Tube
Detail D: Separate Riser Tube
Drum Cover Mountings
Exposed Mountings
Fig. 1