Filter
Top Products
P.O. Box 410 • Schofield, WI 54476-0410 • Phone (715) 359-6171 • greenheck.com
Promo High Wind & Hurricane Fans RG
Rev. 2 November 2006
Copyright © 2006 Greenheck
Severe Duty Products
Model USGF is a leader in severe wind and severe grease
applications. The USGF has been subjected to Miami-Dade
test protocols TAS-201/202/203 for wind pressure and missile
impact. After extensive testing exceeding all standards the
USGF was still in operating condition. The USGF is UL/cUL
listed for restaurant exhaust with continuous operation at
400ºF. The unit is constructed entirely of steel and includes a
non-stick coated steel wheel, NEMA-3R disconnect, hinged
base assembly, and clean out port. Making the USGF ideal in
high wind applications. Performance is AMCA certifi ed to
7,000 cfm and up to 3 inches wg.
Models LDP/LBP are the only rooftop exhaust fan that can withstand
design pressures in excess of 140 PSF. The LDP/LBP with SDLE
enclosure passes all Miami-Dade and Florida Building Code requirements
(TAS-201/202/203). The severe duty LDP/LBP is constructed of Miami-
Dade approved louvers (model ESD-603D) with a high strength structural
steel support frame, and ships mounted to a 12 gauge steel curb. For
applications requiring missile impact resistance turn to the Greenheck
severe duty LDP/LBP for all your exhausting needs. Performance on
these units is AMCA certifi ed and ranges from 100 up to 14,200 cfm and
up to 1.25 inches wg.
Model RSFP is the only rooftop centrifugal supply fan that can
withstand design pressures in excess of 140 PSF. The RSFP
with SDLE enclosure passes all Miami-Dade and Florida Building
Code requirements (TAS-201/202/203). The severe duty RSFP is
constructed of Miami-Dade approved louvers (model ESD-603D) with
a high strength structural steel support frame, and ships mounted
to a 12 gauge steel curb. For untempered supply applications with
missile impact resistance turn to the Greenheck severe duty RSFP.
Performance on these units is AMCA certifi ed and ranges from 650
up to 14,300 cfm and up to 2 inches wg.
The Severe Duty Louver line is the most diverse in the industry. We were
fi rst to offer a Miami-Dade qualifi ed Severe Duty Louvered Enclosure (model
SDLE) and offer three Miami-Dade qualifi ed louver models as well. With the
ability to complete Large Missile Impact and Wind-Driven Rain Testing in-
house, we continue to accelerate our product development and remain an
industry leader.
The Vektor product line is used in applications requiring dilution of exhaust air
or high plume rise above the roof line. Common applications include laboratory
exhaust, odor control and kitchen exhaust. Vektor models are AMCA certifi ed and
UL/cUL listed. Fan systems are rated to withstand 125 MPH wind loading without
the use of guy wires. Vektor product line meets NFPA, ANSI Z9.7, and ASHRAE
code requirements and guidelines for laboratory exhaust systems.
Whether your application calls for meeting
a high wind load, impact resistance, or
resistance to the penetration of wind-driven
rain, Greenheck has the solution.