3
Model NYD & NYB
Options and Accessories
Dampers - Gravity and
motorizeddampersare
designed to prevent outside
air from entering back into
the building when the fan is
off.Dampersizesareshown
on the performance pages.
Disconnect Switches-A
wideselectionofNEMA
rated switches are available
for positive electrical
shutoff and safety, including
dust-tight, rainproof
and corrosion-resistant.
Switches may be internally
or externally mounted.
CurbExtension -
Extensions raise the fan
discharge above the
roofline and provide an
accessible mounting
location for dampers. Insect screen bases
constructed with a removable fine mesh are
recommended for applications where insect
entry must be prevented.
RoofCurbs -
Prefabricated
roof curbs reduce
installation time and
costs by ensuring
compatibility between
the fan, curb and roof
opening.Allcurbsare
insulatedwithfiberglass.Awidevarietyofroof
curbs are available including: flanged, pitched
and sound-absorbing.
CurbSeal - Rubber seal between fan and curb
to assure proper sealing when attached to a
curb.
Coatings - Wide variety of
coatings and colors are
available for decorative to
corrosive applications.
Permatector™is our standard
coating.Typicallyusedfor
applications that require
corrosion resistance in indoor
and outdoor environments.
Hi-ProPolyesteris resistant to salt water,
chemical fumes and moisture in more
corrosiveatmospheres.Typicallyusedfor
applications that require superior chemical
resistance, excellent abrasion and outdoor UV
protection.Thiscoatingexceedsprotective
qualitiesofAirDryHeresiteandHeresite
BakedPhenolic.
BakedEnamelDecorativeCoatingsare heat
cured enamels applied either as wet paints or
electrostaticpowders.Customerscanchoose
from16standarddecorativecolorsorcolor
match any color.
Allcoatingswithrelativeresistancechartscan
befoundinGreenheck’sProductApplication
Guide,PerformanceCoatingsforVentilation
Products.