3. Installation Instructions
3.1 Accessibility, Orientation & Fittings
Mount the VGS2-PC in a location that provides ample space for replacement of filter cartridges. It is recommended that you maintain at least
6”(15 cm) of clear space below the VGS2-PC for this purpose.
3.2 Installation
3.3 Initial Start-up Procedure
The VGS2-PC system has been designed to be installed on the cold water line only.
The presence of small air bubbles in the water system may occasionally give the water a milky appearance, but air bubbles will not affect water
quality or taste. Initially, filtered water may appear cloudy due to the release of air trapped within the filters and throughout the system.
Dependant upon your use of the system, this condition should disappear within a few days following system installation.
Always perform the following start-up procedure when starting your VGS2-PC system for the first time after a storage period:
1. Shut off the main water supply valve.
2. Mark and drill mounting location for the faucet.
3. Install faucet with the hardware provided.
4. Mount the VGS2-PC system to the inside cabinet wall. Please ensure that when mounting the system, a proper sized screw is
utilized so as not to penetra
te the cabinet wall.
5. Install adapter valve on cold water line and ensure plumbing for sink faucet is correctly secured to the top of the adapter.
6. Hook up inlet water connections from the adapter valve to the filter inlet port, and outlet water port to the base of the faucet using
the 1/4”
tubing provided.
7. Confirm that all of the plumbing connections are secured, and partially open the main water supply valve.
8. If no leaks are visible, fully open the main supply valve. Check for leaks.
9. Slowly open the adapter supply valve and check system for leaks.
10. Open the faucet and flush the filtration system for 5 minutes.
11. Your VGS2-PC system is now ready for use.
4
1
Drill & Mount
2
Mount
3
Connect
4
Attach
4. Service and Maintenance
4.1 Accredited Service Technician
Whenever you require assistance, visit www.greenwayhp.com or please call the Customer Service Department at: 1-866-253-0447.