Grindmaster 1750 Espresso Maker User Manual


 
Page 5 Espressimo 2450 & 1750 Espresso Cappuccino Machines
1750 & 2450 External Machine Parts
1.
2.
3.
4.
5.
6.
7.
8.
9.
Left Automatic Touch Pad - When button is
pressed, hot water is dispensed through the filter
holder and into the cup. (See programming instruc-
tions on page #22.) (Not included on Model 1750.)
Hot Water Handle - Pull down to dispense hot
water through hot water spout.
Hot Water Spout - Offers fresh, hot water by the
cup for Cafe Americana, hot tea and cocoa.
Filter Holder - Handle and filter holder assembly for
a single espresso serving. Filter holder is locked
into place under the group head (double filter holder
is also available).
Back Splash Panel
Drain Tray/Basin - Drain tray can be lifted for
cleaning drain basin below tray.
Leg - The machine rests on four legs.
Left Group Head - Where hot water is pressurized
before going through filter holder. (One group head
on Model 1750.)
Cover Panel - Slotted stainless steel lid, lifts off top
of machine. Slots release heat and are often used
to warm cups before use.
10.
11.
12.
13.
14.
15.
16.
17.
18.
Right Automatic Touch Pad - When pressed, hot water
is dispensed through the filter holder and into the cup.
Auto Fill Light - A red light. When lit, indicates that
machine needs water in boiler. The light will flicker on
and off as the boiler is filling with water.
Gauge - Indicates in P.S.I. (lbs. per square inch) steam
pressure in boiler.
Heater Light - An amber light. When lit, indicates heat-
ing element is heating water in boiler.
Steam Handle - Pull down handle to release steam
from steam wand.
Main Power Switch - Turns on power to machine.
(Except “Auto Fill”, which remains on at all times.)
Steam Wand - Upon pulling steam handle, steam is
released from the steam wand for steaming or
frothing milk.
Right Group Head - Where hot water is pressurized
before going through filter holder. (One group head on
Model 1700.)
Filter Holder - Handle and filter holder assembly for a
single espresso serving. Filter holder is locked into
place under the group head (double filter holders is also
available.)