Grindmaster 7443 Coffee Grinder User Manual


 
Item # _______________________________
Project _______________________________
Date _________________________________
Twin and Single Mid Line Fresh Water Urns
Heat Exchange Brewing System
Twin Models 7443, 7446, 74410
Single Models: 7413, 7416, 74110
Electric
Features:
Fresh Water Brewing
Water used for brewing is fresh water that is heated in a coiled,
nickel-plated, copper heat exchange tube inside the urn. As water
passes through the heat exchanger coil it is heated to optimum
brew temperature.
Durable Construction
All A.I.S.I. type 304, 18-8 stainless steel
Constant Brew Temperature
Brew temperature varies less than 5ºF (3ºC) throughout spay over
Automatic Coffee Agitation
Thoroughly mixes brewed coffee immediately after spray over
is completed
Automatic refill of water compartment
Water compartment automatically refills and reheats as needed.
Low water cutoff System
Protects heating elements from burn out, at start-up or in operation.
Velvet Smooth Spray Arm
Teflon® coating on spray arm piston prevents liming and insures
smooth operation. Positive “stops” on spray arm for operator ease.
Easy to operate:
Fully Automatic – Push Button Operation
Simply load brew basket with coffee, align spray arm over basket lid
hole and press brew start button.
Adjustable Bypass valve on spray arm
Enables proper coffee extraction even with variable water conditions
Dial Thermometer with color-marked brew zone.
Thermostat adjustable from front
Knob on thermostat has four marked positions: Brew, Hold,
Night Standby and Off.
Serviceable
Drain valve in bottom
Control drawer with all electronic components is
accessible from side.