Filter
Top Products
Introduction
The Model G9017/G9018 (Figure 1) is designed
for bending thick walled pipes (schedule 40 and
80) and has six different bending dies ranging
in size from
1
⁄2" to 2" for the G9017 (see Figure
2) and from
1
⁄2" to 3" for the G9018. The Model
G9017/G9018 is not designed for bending thin
walled pipes or exhaust pipe.
We stand behind our machines. If you have any
service questions or parts requests, please con
-
tact us.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
Technical Data
Maximum Working Pressure: ............... 6259 PSI
Maximum Load ................................. 24,000 Lbs.
Maximum Travel ............................................
9
1
⁄2"
Pipe Size Capacity ......................
(G9017)
1
⁄2"–2"
.....................
(G9018)
1
⁄2"–3"
Maximum Pipe Wall Thickness .................
0.179"
Hydraulic Oil Reservoir Capacity .......... 2.5 Pints
Type of Hydraulic Oil .....................................
H32
Weight ...................................... (G9017), 90 Lbs.
........................................(G9018), 150 Lbs.
Figure 1. Model G9017.
Figure 2. Model G9017 bending dies.
Size Schedule 40 Schedule 80
1
⁄2" YES YES
3
⁄4" YES YES
1" YES YES
1
1
⁄4" YES NO
1
1
⁄2" YES NO
2" YES NO
2
1
⁄2" YES NO
3" YES NO
Pump
Handle
Bar
The Model G9017/G9018
is a heavy machine (93/152
lbs. shipping weight). DO
NOT over-exert yourself
while unpacking or mov
-
ing your machine—get
assistance.
Inventory (Figures 1 & 2)
A. Bender ........................................................ 1
B. Dies, (G9017)
1
⁄2",
3
⁄4", 1", 1
1
⁄4", 1
1
⁄2", 2") ..... 6
C. Dies, (G9018)
1
⁄2",
3
⁄4", 1", 1
1
⁄4", 1
1
⁄2", 2", 2
1
⁄2",
3") ............................................................... 8
D. Pump Handle Bar ....................................... 1
Socket