Model H7669 HVLP Spray Gun -9-
1. Fluid Control:
2. Pattern Control:
3. Air Flow Control:
4. Atomizing Cap :
5. Trigger :
6. Cup:
7. Regulator/Gauge:
Note: DO NOT attach to an unregulat-
ed air source that exceeds 120 PSI.
Figure 2.
Figure 3.
2.
3.
Note: You have the option of attach-
ing the regulator/guage directly to the
gun as shown in the photos. Some
may find this awkward and would rath-
er mount the regulator/gauge closer
to the air source.
4.
Note: For the best results, use a hose
that will be dedicated for spray use
only. Do not use a hose that has been
used with an in-line oiler or other pos-
sible contaminant.
If you need additional help with this assem-
bly, call our Technical Support at: (570)
546-9663.
ControlsAssembly
1.
Figure 2
