rest, the appliance will enter standby state.
3. Setting the clock
1. on standby state, touch CLOCK key.
Note: on the state of setting clock the step can be omitted.
2. Use the number keys to enter the correct time. You must touch at least three
numbers to set the clock (one for hour and two for minutes).
3. Touch CLOCK key again. the system will enter clock state.
Note: This is a 24 hour clock. When the oven is first plugged in or when power
resumes after a power interruption, the display will show ENTER, CLOCK, TIME,
if you prefer to not have the clock displayed, touch RESET key. You can check
the clock time while cooking is in progress by touching the CLOCK key.
For example: to set 12:30
Depress Display
1
After power-up, the colon flashes, then Depress Reset button
once or wait for 30sec
:
2
Press the button of “ 1”,“ 2”,“ 3”,“ 0”
12:30
3
Press the Clock button to confirm it
4. Setting the oven timer
1. Touch TIMER key.
2. Enter the amount of time you want to count down by touching the number
keys. Digit time is in minutes and seconds and set left to right. Set one digit (a 5
for 5 seconds) or up to four digits (2405 for 24 minutes, 5 seconds). The
maximum number can be entered is 99min, 99sec.
3. Touch START/STOP key confirm it
a. Time countdown can be seen in display for 3 seconds before clock or cooking
time is returned to display.
b. Touch TIMER and then touch RESET to cancel TIMER during timing process.
7