Filter
Top Products
4
Do not cover air vent openings
Allow clearance to the right, left, back and top when installing. This will help reduce power consumption
13A Plug Connection
If your refrigerator is connected to the mains supply using a 3 pin 13 amp plug, the
voltage rating is 220‐240 volts and should be protected by a 3amp fuse in the plug
If the fuse should require replacement for any reason, the fuse must be replaced
with a fuse rated at 3 amps and manufactured and approved to BS1362
If the mains plug is unsuitable for the socket outlet in your home or is removed for
any other reason, the cut off plug should have its fuse removed and be disposed of
safely to prevent the hazard of electric shock. There is a danger of electric shock if
the cut off plug is inserted into any 13 amp socket outlet
In case of malfunction, the plug must be replaced. This must be performed only by
professional personnel
How to wire a UK 13amp
plug (for qualified
personnel only)
Important
The wires color is coded in accordance with the following code:
Green and yellow = Earth
Blue = Neutral
Brown = Live
Double insulated appliances
If the colors do not correspond with the markings identifying the terminals in your plug, proceed as follows:
The green and yellow wire, must be connected to the terminal in the plug which is marked with the letter E or with
the earth symbol or colored green and yellow
The blue wire must be connected to the terminal marked N or colored Blue or Black
The brown wire must be connected to the terminal marked L or colored Brown or Red
Placing Environment
Leveling the cabinet. The refrigerator should be placed on a flat and solid surface. If the refrigerator
is placed on an uneven surface, flat strong and fire‐resistant materials must be used. Never use the
foam packing material as a pedestal. If the refrigerator is slightly unstable, you can lengthen or
shorten the adjustable feet of the refrigerator by turning them clockwise or anticlockwise
Never place the refrigerator in a damp area or location where it may be splashed with water.
The refrigerator with a water connection should be placed in a well‐ventilated place not far from a drink water
source. A space of at least 20cm and 10cm must be kept above and around the refrigerator
Keep ventilation openings, in the appliance enclosure or in built‐in structure, clear of obstruction
Preparation prior to use
Remove all package parts: remove the foam base and the adhesive tape fixing accessories
Check the items inside the package box against the Packing List. Please inquire with the purchase shop if there is
any discrepancy within 5 days of purchase
Move the refrigerator into a proper location: see section “Placing Environment”
Please clean the refrigerator inside and outside with water before putting into any food on it
Idle Standing: after the appliance has been leveled and cleaned, let it remain idle for at least 6 hours before
switching it on so as to ensure normal running
Connection to power supply: when the refrigerator is connected to power supply, the fridge temperature and the
freezer temperature are automatically set to 5°C and ‐18°C respectively. The My Zone is on “chiller mode”
Operation modes of the refrigerator (manual adjustment mode): can set temperature by pressing the temperature
setup key. (see “Function Description” section of this manual)
Load the refrigerator with food after it has been operating for a short period and the inside is cool enough