Preparation prior to use
Remove all package parts
Please also remove the foam base and the adhesive tape fixing accessories.
Check accompanying accessories and documents
Check the items inside the package box against the
Packing List. Please inquire with the purchase shop if
there is any discrepancy.
Install the handles
( ) Take
out the two handles from the accessory box and
insert them in the handle seats respectively as
shown in the figure. Secure the handles on the
doors with the supplied (4) screws from bottom to
upper direction.
AFL631CW/U/AFL631CS/U/AFL631CB/U
Move the refrigerator into a proper location
(See section “Placing environment”)
It is advisable to clean the cabinet before use
Please clean the inside and outside of the refrigerator with
water before putting into any food in it.
Idle standing
After the appliance has been leveled and cleaned, let it
remain idle for at least 6 hours before switching it on so as to
ensure its normal running.
8