Filter
Top Products
15
Washing dishes
Programme selection
The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as
well as the amount and condition of food remains, with the details contained in the wash cycle table.The
corresponding programme sequence, duration and consumption details are shown in the right half of the
overview. For example:
Use the« normal» programme for dishes and utensils which have plenty of food remains stuck on
hard.
Earn savings
If only a small number of dishes have been loaded into the dishwasher,selecting a programme that
operates at the next lowest temperature which should be sufficient.
Programme data
The stated programme data are based on standard operating conditions. The values can vary consider-
ably according to:
different amounts of dishes
temperature of mains water supply
pressure of mains water supply
ambient temperature
fluctuations in mains voltage
machine-related factors (e.g. temperature, water volume,...)
Switching the dishwasher ON
Close the door after loading the appliance.
Set On-Off button “B” to On. The state indicator "A" light.
Rotate the knob to select programme you wish. After 3 sec-
onds the appliance emits a short warning signal, and start
the programme, the state indicator "A" blinks.
Warning
After a washing program ends, the knob indicates the same position as the last washing
program. To start another washing program, turn the knob to the reset position, then
choose the next washing program.
B
A
en