Filter
Top Products
.8.
Repairing
In the event of a fault occurring during operation, check
first if the fault is due to an operation error. You can
repair the following faults yourself.
The appliance does
not run.
The temperature in-
side the appliance is
not low enough.
Excessive noise from
the appliance.
1. It is not switched on properly, or the mains plug
is not properly inserted in the socket.
2. The thermostat knob is turned to position “0”.
3. Supply voltage is too low.
1. The appliance is too full of food.
2.
The appliance is located too close to a source of heat.
3. The door is not properly closed or is opened too
frequently.
4. The vent grille is covered over.
The appliance is not standing securely on the ground.
If it is none of these circumstances and you are not able to
repair the fault, please contact a authorised service agent.