Before using your icemaker, it is strongly recommended that you clean the
icemaker thoroughly. Be sure to clean the icemaker regularly.
1. When cleaning, please make sure the power has been turned off and the
plug is disconnected from the outlet. When plugging or unplugging the unit
from the outlet, pull directly on the plug. Never pull on the power cord.
2. Remove the ice storage basket.
3. Drain remaining water from the unit by unplugging the drain plug
on the front bottom side. When cleaning is completed, the plug
must be properly inserted back onto the drain otherwise the
icemaker will leak.
4. Use a mild detergent diluted in warm water and wipe with a soft
towel or sponge.
Solvents, detergents and abrasives must never be
used for cleaning.
5. Wipe the inner parts, such as the ice storage basket, water reservoir, water
box, ice pusher, and evaporator rods.
6. The outside of the icemaker should be cleaned regularly with a mild
detergent solution, warm water, and a soft cloth.
7. Dry the interior and exterior with a soft cloth.
8. To begin making ice once the unit has been cleaned, pour clean water into
the water reservoir and fill up to the level line follow operating instructions.
Never tilt or place the icemaker on its side, otherwise you must wait
10 hours for compressor coolant to settle.
9. To ensure the cleanliness of the ice cubes, the water in the water storage tank
should be replaced every 24 hours.
10. When the machine is not in use or will not be used for an extended period
of time, pull out the drain plug at front bottom of the machine to empty the
remaining water in the water reservior completely. (Follow the instructions in
number 4 above.)
10
English
CLEANING AND MAINTENANCE
Drain Cap
Drain Spout
Rubber Plug