Filter
Top Products
Express Freeze Setting
Express Chill Setting
The function is designed to preserve food's nutritional value by deeply freezing it in a short period of time. Press
the M button. The express freeze indicator will light up. This indicates that the express freeze mode is chosen,
and express freeze will function automatically. It will stop after 3 hours. If you want to turn off express freeze
before 3 hours is up, press the M button again. The express freeze will then turn off.
Press the T button. The express chill indicator will light up. This indicates that the express chill mode is chosen,
and express chill will function automatically. It will exit automatically. If you want to turn off express chill press
the T button again. The express chill will then turn off.
Ice maker Switch Function:
When the unit is in the locked status, Press the G and F buttons at the same time for 3 seconds. A buzzer will
sound, indicating the ice maker is off and in the locked status. To turn the ice maker back on, press the G and F
buttons again for 3 seconds. You will hear another buzzer, and the ice maker will be back on.
When the fridge is in the fast freezing and fast cooling status, the fridge will keep cooling
continuously.
Fast Freezing Function of Convertible Compartment
When the convertible compartment is use as soft freeze andthe unit is in the locked status, press the Abutton for 3
seconds to enter the convertible compartment's fast freezing mode. "L" displays the set range, and "K" displays .
Press the A button for 3 seconds again to stop the fast freezing of the convertible compartment.
""
Fast Cooling Function of Convertible Compartment
When the convertible compartment is used as refrigerator and the unit is in the locked status, press theA button for
3 seconds to enter the convertible compartment's fast cooling mode. "K" displays the set range, and "L" displays .
Press the A button for 3 seconds again to stop the fast cooling of the convertible compartment.
""
The filter indicator light alerts you when it is time to change the filter cartridge.
If you don't change it often enough, water quality will be affected. You should change the filter at least every
6 months, or when water flow from the dispenser or ice maker decreases noticeably. Please note that you
may have to change the filter more often than every 6 months, depending on local water conditions.
and " " on the door displayCF
The "Filter Indicator" Light
1. Remove the old filter by turning the filter cartridge
handle CCW.
2. The cartridge will eject slightly from the filter housing.
3. Pull out the cartridge from the filter housing.
Water may be retained in the old filter cartridge.
This could cause some water spillage through the
filter housing drain.
4. Remove the protective heat seal from the new filter cartridge. Insert
it into the filter housing with the filter cartridge handle in the vertical
position. Then push the filter cartridge into the housing until it stops.
5. Gently turn the cartridge handle CW until it stops. The cartridge
handle should now be horizontal.
6. Run the refrigerator water dispenser for 5 minutes after replacing the
filter, to flush out the water tank. Discard the water.
7. After replacing the Haier filter cartridge, reset the refrigerator display.
The refrigerator water dispenser and ice maker cannot be used
without the water filter.
1. Do not use water filter, dispenser, or ice maker with water that is microbiologically unsafe or if
you are not sure that it is safe, without disinfecting the water before or after it goes through the
system. Systems certified for cyst reduction may be used on disinfected waters that may contain
filterable cysts.
2. After installing a new water filter, discard all ice produced during he first 24 hours.
3. If the refrigerator drinking dispenser or ice maker has been used actively for an extensive
period of time, or if ice cubes have an unpleasant taste or odor, change the water filter.
4. Air trapped in the system may cause water and filter cartridge to eject. Use caution when
removing.