Filter
Top Products
14
English
17. MEMORY FUNCTION
16. PRE-SET FUNCTION
(1) Set the clock first. (Consult the instruction of clock setting.)
(2) Set a certain cooking procedure(one or two blocks), the setting method and display are
same as relevant cooking procedure. (Defrosting is beyond pre-set cooking).
(3) Press " CLOCK/PRE-SET " to display current time and hour figure is flashing, the icon
" : " and other " 0 " keep lighting on.
(4) Press number keys to input the cooking time.For example: to set the time is 12:12, you
can press the number keys "1","2","1","2" in order.
(5) Press " AM/PM " to choose AM or PM. AM or PM will be selected in turn
by press the button of " AM/PM " continuously.
(6) Press "START/ +30 SEC." to confirm the preset procedure.When it is confirmed, the unit
will go back the clock states.
(7) Cooking will begain when time arrives.
18. MULTI-STAGE COOKING
This microwave oven can be set with 2 stages cooking.
Example: To defrost beef of 40 oz first and then cook with full power for 10 minutes.
1) Press "DEFROST BY W.T." to choose defrost by weight function;
2) Press "4","0" in sequence;
3) Press "POWER" once to choose full power;
4) Press "1","0","0","0" in sequence;
5) Press "Start/ +30 Sec." to start cooking.
Note: (1) Time defrost and auto function cooking can't be set as one of the 2 stages cooking.
(2) Weight defrost can be set as the first stage cooking only.
(1)Press "MEMORY" to choose memory 1-5 procedure. The LED will display 1,2,3...5.
(2) If the procedure has been set, press " START/ +30 SEC." to use it. If not, continue to set
the procedure. Only one or two stages can be set.
(3) After finishing the setting, press "MEMORY" to save the procedure and turn back to the
waiting states.If press " START/ +30 SEC." ,it can save and operate the setting.
Note: Auto menu cooking cannot be set as memory procedure.
19. LOCK FUNCTION FOR CHILDREN
Lock: In waiting state, press " STOP/CLEAR " for 3 seconds, there will be a long "beep"
denoting the entering the children-lock state; meanwhile, LED will display " "
Lock quitting: In locked state, press " STOP/CLEAR " for 3 seconds, there will be a long "beep"
denoting that lock is released.