Filter
Top Products
5
1. Always connect CO
2
gas cylinder to a regulator. Failure to do so could result in an
explosion with possible death or injury when the cylinder valve is opened.
2. Never connect CO
2
gas cylinder directly to beer keg.
3. Always secure CO
2
gas cylinder in an upright position.
4. Always keep CO
2
cylinder away from heat.
5. Never drop or throw CO
2
gas cylinder.
6. Always check the D.O.T (Department of Transport) test date located on the nick of the
cylinder. If over five (5) years, do not use, return the gas cylinder to gas supplier.
7. Never connect a product container unless there are two (2) safety mechanisms in the
pressure system;
a) One of the CO
2
regulators. (The regulator supplied with this unit is inclusive of
such a safety mechanism)
b) One at, on the product container coupler, or in the pressure gas line. (The keg
coupler supplied with this unit is inclusive of such a safety mechanism)
8. Always ventilate area after any leakage of CO
2
9. If it becomes difficult to breath and/or your head starts to ache, abnormal concentrations
of carbon dioxide (CO
2
) may be present in the area. CLOSE THE MAIN VALVE ON
THE CO
2
CYLINDER, VENTILATE AND LEAVE THE ROOM IMMEDIATELY.
10. CO
2
gas cylinder should be stored in the coolest part of the establishment (preferably;
at 70°F (21°C) and must always be securely fastened in the “upright” position.