Haier WDNS116BBS Water Dispenser User Manual


 
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing an escape wire for the
electric current. This appliance is equipped with a cord containing a grounding
wire and a grounded plug. The plug must be inserted into an outlet that is prop-
erly installed and grounded.
Improper use of the plug may result in the risk of electric shock.
Consult a qualified electrician or service technician if the grounding
instructions are not completely understood or if in doubt as to whether
the appliance has been properly grounded.
WIRING REQUIREMENTS
This appliance must be plugged into a 15Amp, 115 Volt, 60Hz
GROUNDED OUTLET.
Note: Where a standard two-prong outlet is encountered, it is the personal
responsibility and obligation of the consumer to have it replaced with a
properly grounded three-prong outlet.
EXTENSION CORDS
We do not recommend the use of an extension cord with
this unit.
POWER INTERRUPTIONS
Occasionally, there may be power interruptions due to thunderstorms or
other causes. Remove the power cord from wall outlet when a power out-
age occurs. When power has been restored, re-plug the power cord into
wall outlet.
ELECTRICAL CONECTIONS
English
6
This water dispenser maintains instant hot and cold water for your cooking and
drinking needs. It accepts 3 or 5-gallon water bottles.
Cold / Hot Water Release Levers
Press the button to release the water flow.
Note: The hot water faucet is equipped with a child safety lock to prevent
accidental spilling of hot water. To release the hot water flow, push the
child safety lock button down and as you push in the hot water button.
Caution: Be careful when carrying hot water in your cup or container to avoid
any injury or harm from spills.
OPERATING YOUR WATER DISPENSER