Filter
Top Products
33
Parts and Features
1. Lid
2. Anti-Scale Mesh Filter
(inside spout)
3. Power Base
4. Power Switch
I = ON
O = OFF
Using Your Electric Kettle
BEFORE FIRST USE: Fill kettle to
MAX indicator on water level window
and bring to a boil until kettle shuts off
automatically. Discard water and
repeat. Rinse out kettle 2 or 3 times.
The kettle is now ready for use.
1. Remove from power base
before filling.
2. Fill kettle with required amount of
water. Ensure that water level is
between MIN and MAX on the
water level indicator. If using the
mesh filter, it must be in place.
3. Make sure that the lid is in place and
the power base is on a level surface.
If lid is not in place, auto shut-off
will not operate.
4. Plug into outlet and turn on ( l ).
5. The kettle will switch off (O)
automatically when the water has
boiled. (Remember, the surface of the
kettle gets hot; take care–only grip the
kettle by the handle).
6. After use, unplug kettle and empty.
NOTE: Use water only in the kettle. If
used for foods or beverage such as tea
or coffee, the warranty will be voided.
If Heating Element Discolors
It is normal for stainless steel heating elements to discolor. This does not affect
the performance of the kettle. Do not use abrasive scouring pads or cleaners as
this may damage the stainless steel surface.
wWARNING
Burn Hazard
If kettle is overfilled, boiling water may spit out of the spout.
840152800 ENv04.qxd 6/22/06 3:55 PM Page 3