Hamilton Beach 40898 Hot Beverage Maker User Manual


 
5
Parts and Features
1. Lid
2. Anti-Scale Mesh Filter
(inside lid)
4
3. Power Base
4. Power Switch
5. Cord Wrap (can exit to left
or right of handle)
The length of the cord used on this appliance was selected to
reduce the hazards of becoming tangled in, or tripping over a longer
cord. If a longer cord is necessary an approved extension cord may
be used. The electrical rating of the extension cord must be equal
to or greater than the rating of the kettle. If the appliance is of the
grounded type, the extension cord should be a grounding-type,
3-wire cord. Care must be taken to arrange the extension cord so
that it will not drape over the countertop or tabletop where it can be
pulled on by children or accidentally tripped over.
OTHER CONSUMER SAFETY INFORMATION
Using Your Electric Kettle
BEFORE FIRST USE: Remove plastic bag from outside
kettle and any packaging that may be inside the kettle. Fill
the kettle to the MAX indicator inside kettle and bring to a
boil until kettle shuts off automatically. Discard water and
repeat the process. Rinse out the kettle 2 or 3 times. The ket-
tle is now ready for use.
To Remove Kettle Lid:
1. Press button on handle to open lid.
2. Press button on underside of lid to release hinges on
inside of kettle and pull straight up.
To Replace Kettle Lid:
Align notches on side of lid with hinges on inside of kettle
and snap securely into place.
840139600 Ev02.qxd 3/21/06 3:45 PM Page 4