Filter
Top Products
7
Cleaning
6
Digital Clock Timer (on selected models)
To Set Clock:
1. Plug in coffeemaker.
Numbers on
clock will flash until
you set time of day.
2. To set time of day,
press H (hour) button to
set current hour. AM or
PM will be displayed.
3. Press M (minute) button until you reach the current time.
Auto Indicator
Light
Permanent Filter (on selected models)
The permanent filter takes the place of disposable paper filters.
Place the permanent filter in the brew basket with the notch
facing the front of coffeemaker. Rinse the permanent filter in
hot water before first use. Clean the permanent filter under
hot running water and let dry. Permanent filter can be placed
in top rack of automatic dishwasher.
Automatic Shutoff (on selected models)
The Automatic Shutoff feature shuts off the Keep-Hot Plate
two hours after brew cycle begins. Always turn coffeemaker
OFF and unplug when finished.
To Set and Use Automatic Brew:
1. Make sure clock is set for correct time of day.
2. Fill coffeemaker with desired amount of water and coffee.
Place carafe with lid on Keep-Hot Plate.
3. While holding PROG (program) button, press H and M
buttons until desired brewing time is reached.
4. Once desired brewing time has been reached, release
PROG and current time is displayed.
5. Press AUTO to set coffeemaker to come on automatically
at the desired time.
6. An illuminated green light to the left of the AUTO button
idicates that the brew cycle will begin at the set time.
7. Press AUTO again to cancel automatic brew.
ON/OFF
Indicator Light
To maintain performance of coffeemaker, clean once a month.
To Clean the Inside of the Coffeemaker:
1. Place empty carafe on Keep-Hot Plate. Close empty brew
basket.
2. Pour one pint of plain white vinegar into the reservoir.
3. Plug unit into electrical outlet and turn ON.
4. After 30 seconds turn OFF.
5. Wait 30 minutes to allow the vinegar to clean. Then turn
ON again. When the brew cycle is finished, turn OFF.
6. Empty carafe and rinse. Pour one carafe of cold tap water
into the reservoir. Place carafe on Keep-Hot Plate.
7. Turn ON. When the brew cycle is finished, empty the carafe.
Repeat this process with one more carafe of cold tap water.
8. Turn OFF when complete.
9. Wash carafe and brew basket before making a beverage.
840162500 ENv01.qxd 3/8/07 3:01 PM Page 6