Filter
Top Products
5
QuickBurst
™
Press and hold down the button for
additional power
at any speed.
NOTE: Never use
QuickBurst
for more than
two minutes at
a time or motor
may overheat.
Shift and Stir
™
Bowl Lever
Use the lever to move the turntable.
This allows you
to position the
beaters near the
edge of the bowl
or in the center
for better mixing
performance.
Mixer Release Button
Use this feature to release the mixer
from the “locked”
position on the
stand.
Bowl Rest
™
This feature can be used on most large
mixing bowls.
Use the Bowl
Rest while adding
ingredients or
checking a
recipe. To use,
TURN MIXER
OFF, then set
the mixer on the
edge of the bowl.
CAUTION! Pinch Hazard. Never use
Bowl Rest when mixer is on.
NOTE: Do not use Bowl Rest on small
(1
1
⁄2 quart) mixing bowls or plastic
mixing bowls.
QuickBurst
™
Using Your Mixer
1. Always make sure mixer is unplugged
and OFF before inserting beaters,
using as a hand mixer or assembling
on the stand.
2. Plug mixer into electrical outlet.
3. Move the speed control to desired
speed, starting at 1 and increasing
to a higher speed as necessary.
4. If using as a stand mixer do not
leave mixer unattended. Always
monitor the progress of the mixing.
5. When finished mixing, move the
speed control to OFF and unplug
mixer.
6. To eject beaters, push straight down
on the eject
button.
7. To remove mixer from stand, hold
mixer and press mixer release but-
ton. Pull mixer to release from stand.
Features
Bowl
Lever