Filter
Top Products
6
Care and Cleaning
1 2 3
Grasp blade assembly by plastic guard
and pull blade release button
to remove from motor housing.
Cut Hazard. Always make sure the cord is not plugged into outlet when insert-
ing and removing blades from motor housing. Blades are extremely sharp.
Always handle by the side opposite the cutting edge or by the plastic guard.
Electrical Shock Hazard. Do not immerse knife, cord, or plug in any liquid.
w WARNING
4
Unlock blades by sliding rivet on one
blade out of keyhole in other blade.
5
Carefully wash blades in hot, soapy
water. NOTE: Carving fork and bread
guide (optional features) can also be
washed in hot, soapy water.
6
Wipe motor housing and cord with
damp cloth. Dry thoroughly.
840147201 ENnv03.qxd 7/10/08 2:39 PM Page 6