Filter
Top Products
5
4
1. Filler-Cap
2. Lid
3. Jar
PULSE Button – For instant
control. Pulse operates only as
long as the dial is aligned with
Pulse “P”. The blender motor
stops when the dial
is released.
4. Base
5. Rotary Dial (see page 5
for more information)
6. Cutting and Salting Board*
Cutting Unit
Assembly
7. Gasket
8. Blades
9. Jar Collar
*optional feature
8-Speed Control
• For best blending results, fill the blender jar at least half full.
• Use the round area of the cutting and salting board to salt your
margarita glass.
• Use the square area of the cutting and salting board to cut
limes.
• Use the blender’s filler cap as a 2-ounce (60 ml) liquid measure.
• Processing hot foods or liquids in blender may cause hot liquid
to spurt out when the cover is removed. Always remove the
filler-cap from the cover before blending hot foods or liquids.
• To add foods when blender is operating, remove filler-cap from
container cover and add ingredients through the opening.
• If blending action stops during blending or ingredients stick to
sides of the jar, turn blender OFF. Remove cover and use a
rubber spatula to push mixture toward blades.
• Do not try to mash potatoes, mix stiff dough, whip egg whites,
grind raw meat, or extract juices from fruits and vegetables.
The blender is not made to perform these tasks.
• Do not store food or liquids in the blender jar.
• Avoid bumping or dropping the blender.
Parts and Features Parts and Features
Tips and Hints for Best Use
Before First Use: After
unpacking the blender, wash
everything except the blender
base in hot, soapy water. Dry thoroughly. Do not place in
dishwasher. Wipe the blender base with a damp cloth or
sponge. DO NOT IMMERSE THE BASE IN WATER. Care
should be taken when handling the blades as they are very
sharp.
LO HI
Yeehah 1 or 5 (Pulse)
Siesta 2 or 6
Andale 3 or 7
Arriba 4 or 8