Filter
Top Products
TO INSERT ATTACHMENTS
Twisted Wire Beaters
■ Make sure mixer is unplugged and speed
control is set to OFF.
■ Insert wire beater with collar into opening
indicated by the illustration on the bottom of
mixer . Push until it clicks into place. Push
second beater into other opening until it
clicks into place.
Whisk and Milkshake Attachments
■ Make sure mixer is unplugged and speed
control is set to OFF.
■ Insert attachment into either opening on the
bottom of the mixer. Push until it clicks into
place.
Collar
w
WARNING
Pinch and Crush Hazard
■ Make sure that mixer is off and unplugged before installing or
removing attachments.
■ Do not reach or insert utensils into bowl while mixer is running.
Failure to follow these instructions can result in broken bones,
cuts or other serious injury.
6
840148500 v05.qxd 5/11/06 1:19 PM Page 6