Filter
Top Products
5
Cleaning Your Kettle
1. With kettle unplugged, empty any
remaining water and rinse. Allow
kettle to cool.
2. Remove Filter: Remove lid, grasp fil-
ter, pull out and
slide up to
remove. To
clean the filter,
rinse it under
running water
and brush with
a soft brush. An
old, clean
toothbrush works well.
3. Replace Filter: Set screen into open-
ing. Slide down and into place.
4. To avoid scale/lime deposit build-up,
empty kettle after each use.
3. Wipe the exterior of kettle with a
damp cloth. Do not use abrasive
scouring pads or powders as they
may scratch the smooth surface of
the kettle.
wWARNING
Electrical Shock Hazard
•
Do not immerse kettle, power base or plug in any liquid.
•
Failure to follow these instructions can result in death or electrical shock.
840155610 ENv01.qxd 11/1/06 8:59 AM Page 5