Filter
Top Products
7
6
Hints for Best Use
• The can opener will easily open all standard size cans.
• On some models it will be necessary to position can opener
at edge of counter, allowing for clearance to open cans
taller than the can opener.
• If there is a bump, dent, or heavy seam in the rim of the
can, open the other end of the can or start cutter just
beyond the problem area.
• The motor of your can opener is permanently lubricated
and will require no oiling.
• To use the cord storage on the back of the opener, push in
or pull out the cord as needed.
Sharpening Knives
1. Place cutting edge of knife in the
knife slot located on the back of
the can opener.
2. Draw the knife blade through the
slot several times.
NOTE: Serrated blades should never
be inserted into this unit.
How to Clean Your Can
Opener
1. Unplug cord from electrical outlet.
2. To remove the piercing lever,
push lever up and to the left.
It will pop out of a locked
position.
3. Wash the piercing lever in hot,
soapy water. Rinse and dry
thoroughly. Do not place in
dishwasher.
4. Wipe the body of can opener
with damp cloth. NEVER im-
merse the can opener in water.
5. To assemble, place the knob
on the back of piercing lever
into large end of keyhole with
the lever pointing toward the
ceiling. Push the lever to the left
until it locks into place.
Remove
Reassemble