Henkel K-450 Oven User Manual


 
Keen Ovens
K-450 SPECIFICATIONS
Electrode Capacity 450lbs. 18" rods
Volts 120 V 240 V 480 V
Watts 1000W 1000W 1000W
Thermostat Dial Adjustable
Temperature 150ºF-550ºF
Insulation 2"
Interior Dimensions 19.5"D X 20"
Net Weight 81lbs.
Shipping Weight 86lbs.
Shipping Dimensions 26" X 28" X 26"
Safety Precautions
Read all instructions completely before attempting to operate this unit.
*** SAVE THESE SAFETY INSTRUCTIONS ***
To reduce the risk of electrical shock, fire, or personal injury follow the guidelines below:
Before connecting unit to a power source, be sure the voltage supplied is the same as that
specified on the nameplate of the unit.
Check outlet to ensure proper grounding of the electrical cable. Have a licensed electrician
check the A/C power outlet if you are not sure.
Use this unit for its intended purpose as described by literature.
Make sure power cord is located so that it will not be stepped on, tripped over, or otherwise
subjected to stress of heat, oil, or sharp edges. Do not close doors on the cord.
To reduce the risk of damage to the electric plug and cord, disconnect by plug rather than by
the cord.
Do not use this unit if cord or plug is in poor condition. If it has been exposed to weather or
immersed in water, have a qualified serviceman inspect and replace parts as necessary.
WARNING! NEVER HANDLE PLUG, CORD, OR UNIT WITH WET HANDS OR
WHILE STANDING IN WATER.
Use special care when moving heavily loaded units.