Henny Penny OGA-323 Fryer User Manual


 
PLAN
49 3/8 in. (1254 mm)
© 2006 Henny Penny Corporation, Eaton, OH 45320 USA Revised 11/01/07
Laboratory certifications
Continuing product improvement may subject specifications to change without notice.
PROJECT ITEM NO
www.hennypenny.com
Bidding Specifications
Provide Henny Penny model OEA-323
three-well electric open fryer or model
OGA-323 three-well gas open fryer, 45 lbs.
(20.4 kg) capacity per load, with auto-lift
feature, Computron
®
8000 control, and
built-in filtration system standard.
Materials—cabinet, deck, exhaust stack,
filter drain pan and various fittings are
stainless steel. Fry pots are heavy duty
stainless steel.
Units shall incorporate high-efficiency heat-
exchange design for extremely fast recovery.
Units qualify for the ENERGY STAR
®
mark.
Heating elements encircle the fry pot part-
way up the side, and are not located at the
bottom or below the pot. This design
produces a “cold zone” that extends oil life.
Units shall have two auto lift mechanisms
and timers per well.
Unit’s controller provides for programmable
or manual operation with press-key controls
and LED digital display. Control offers idle and
melt modes, load compensation, filtration
tracking and 7-day history.
Units will include four heavy-duty casters, two
locking.
Units ship with stainless steel Max filtration
screen and 2 PHT filter envelopes, (3) full
baskets, (2) full and (2) half baskets, (1) full
and (4) half baskets, or (6) half baskets.
Electric units:
(3) electrical connections,
one per well
FRONT
Gas units:
(1) 1-inch gas
connection
MODEL OEA-323 3-well electric
OGA-323 3-well gas
Auto lift open fryers
Capacity
Product 45 lbs. (20.4 kg)
Oil 195 lbs. (88.5 kg)
Fryer throughput: fries/hr.
Electric 189 lbs. (85.8 kg)
Gas 216 lbs. (98.1 kg)
Electrical
37 3/8 in. (949 mm)
54 5/8 in.
(1387 mm)
Height includes
casters
Dimensions
Width 49 3/8 in. (1254 mm)
Depth 37 3/8 in. (949 mm)
Height 54 5/8 in. (1387 mm)
Required clearances
Sides: 6 in. (152 mm) air flow
Back: 6 in. (152 mm) air flow, connections
Front: 30 in. (762 mm) filter pan removal
Crated dimensions
Length 55 in. (1397 mm)
Depth 39 in. (991 mm)
Height 65 in. (1651 mm)
Volume 80.7 cu. ft. (2.29 m³)
Net weight N/A
Crated weight
Electric 616 lbs. (279 kg)
Gas 707 lbs. (321 kg)
Heating
Electric Immersed elements, 43.2 kW
Gas
Natural or liquid petroleum
(6) burners, 255,000 BTU/hr (75 kW)
(1) 1 in. connection
Watts Amps
Volts Phase Cycle/Hz
Per well Total Per well Total
Wire
208 3 60 14400 43200 39.9 119.7 3+G
240 3 60 14400 43200 37.2 111.6 3+G
480 3 60 14400 43200 17.5 52.5 3+G
Three electrical connections required, one for each well. Power cord and plug must be
installed on site by a qualified electrician.
Gas models
120 1 60 N/A 12.0 36.0 2+G
230 1 50 N/A 2.5 7.5 1NG