Hobart C44A ML-104047 Dishwasher User Manual


 
– 8 –
INSTALLATION
UNPACKING
Immediately after unpacking the dishwasher, check it for possible shipping damage. If the machine is
found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.
Prior to installation, verify that the electrical service agrees with the specifications on the machine data
plate, which is located on the right-hand side of the control box for non-booster machines and on the
left-hand side of the control box for booster equipped machines.
The electrical diagram is located on the inner surface of the control box cover.
After unpacking the dishwasher, remove the items shipped uninstalled (overflow tube, literature
envelope, splash shields, curtains and chamber hole plug kit) and instructions from inside
the dishwasher. Set the dishwasher in its proper location. Adjust the height and level by turning the
adjustable feet.
NOTE: The dishwasher must be positioned and leveled before making plumbing connections.
NOTE: This machine must be operated with an automatic detergent feeder and, if applicable, an
automatic chemical sanitizer feeder, including a visual means to verify that detergents and sanitizers
are delivered or a visual or audible alarm to signal if detergents and sanitizers are not available for
delivery to the respective washing and sanitizing systems. See instructions for electrical and plumbing
connections located in this manual and in the feeder equipment manual. Chemical feeders are supplied
by others.
INSTALLATION CODES
Installation must be in accordance with state and local codes, or in the absence of local codes, with the
National Fuel Gas Code, ANSIZ223.1 (latest edition), if applicable, and the National Electrical Code
ANSI/NFPA 70 (latest edition). In Canada, the installation standards are: CAN/CGA B149.1,
CAN/CGA B149.2 and CSA C22.2 No. 1 (latest editions).