Hobart HBA2G Oven User Manual


 
– 22 –
Setup Guide (cont)
Setup
Number Setup Item Display
P14* Steam Timer Mode The STEAM TIMER can be set up to display in seconds or
operate in food service mode. Select 0 for seconds or 1 for
food service mode.
P15* Interior Light Brightness This value is the brightness of the interior lights. The higher
the number, the brighter the lights. Range is 50 to 100.
P16* Clock Operation This selects either 12 hours (AM/PM) or 24 hours real time
display. Press the Bake Time Up button to switch between
the two types of display.
P17* Temperature Setback Time This selects the elapsed time from the last timed bake to
when the oven will lower the oven set temperature to the
value set in P18. Range is 10 to 180 minutes.
P18* Setback Temperature This selects the oven set temperature that the oven will
change to when the temperature setback time has been
exceeded in P17. Range is 50°F to 300°F (10°C to
149°C).
P19* Lights Mode Select 1 for lights on continuously (when oven is on) or
select 0 for automatic operation. Lights will turn off
automatically after 30 minutes of no user activity (door
opened or closed, no buttons pushed).
* Setup items only accessible on ovens equipped with advanced controls
SHUTDOWN
NOTE: Before restarting a gas oven, power switch and gas burner valve must be off for a minimum of
5 minutes.
1. Remove all remaining product.
NOTE: Vent can be used to cool the oven.
2. Press the POWER ON OFF button.
3. Clean the baking chamber. (See Cleaning.)
4. For lengthy shutdowns, disconnect the main power and shut off the gas and water supply.