Filter
Top Products
— 4 —
HF Series Fryer — Construction Features
Model Filter Ready
Battery Battery
Configuration Interplumbing
HFD50/HFC50 Opt. (Use HMF50) Opt. Opt.
HFD85/HFC85 Opt. (Use HMF85) Opt. Opt.
Model
Fat Melt
Thermostat Basket Lift(s)
Basket(s)
Cycle Twin Single Tri
HFD50
Std.
Solid State
Opt.
Std. Opt. N/A
HFD85 Digital Display Std. Opt. Opt.
HFC50
Std. Opt.
Std. Opt. N/A
HFC85
Computer
Std. Opt. Opt.
HF Series Fryer — Features
BATTERY CONFIGURATIONS
Batteries of up to four fryers wide can be configured with any HF Series Fryer or HFO Frymate Dump
Station (either 15
1
/2" [39 cm] or 21" [53 cm ] wide). Possible configurations showing positions A through
E are depicted below:
NOTES:
= Dump Station; = Fryer.
*Indicates filter interplumbing not available.
A filter dump station can be located under any position in a battery if it has been built without an HFO Frymate.
A filter dump station can be located under any position in a battery if the line-up has been built with an HFO
Frymate located at either end of the battery.
When a HFO Frymate is built between two fryers within a battery, the filter dump station is located under the HFO
Frymate.
In two-unit batteries utilizing a HFO Frymate, the filter dump station will always be located under the fryer.
All options and accessories can be used with batteried equipment.
HFO15 is used on Model HF50.
HFO21 is used on Model HF85.