Filter
Top Products
— 11 —
Temperature Display — Displays actual oven cavity temperature during cooking cycle.
Read Set Point Button — Push to display set temperature.
Load Indicator Light — When lit, indicates that the heat is being provided to the oven.
Time Display — Displays actual cooking time in minutes and tenths of minutes.
Time Range Switch — Use to set cook time range from 2 to 8 minutes, 8 to 15 minutes, or 15
to 20 minutes. Switch must be on cook time range desired in order to
change belt speed.
Belt Switch — Press switch to ON to start the conveyor belt; press to OFF to stop the
conveyor belt.
Power Switch — Press to ON to start the oven; press to OFF to stop the oven. When
the power switch is pushed to ON, ignition occurs automatically.
Time Knob — After the Time Range Switch has been set to the desired time range,
turn the knob clockwise to increase the cook time or counterclockwise
to decrease the cook time until it reaches the time desired on the time
display.
Cycle Time — This is a service control only. Do not touch this control.
Man. Reset — This is a service control only. Do not touch this control.
Set Point — Set point adjustment control.
1. Locate the Set Point knob behind the doorflap to adjust the set
point.
2. Press the Read Set Point button so that the set point is displayed,
and at the same time, turn the Set Point knob until the desired set
point temperature appears in the digital display.
3. Release the Read Set Point button.
4. Do not make any other adjustments to this control.
Prop. Band — This is a service control only. Do not touch this control.