Filter
Top Products
– 29 –
USING THE FRYER (After Startup)
Models Without Basket Lift Option
1. Load the fry basket(s); do not overfill. See Recommended Basket Capacities on page 30.
2. Carefully lower basket(s) into shortening.
3. Press the desired number to start the timer. Timers
through are for the left basket and
through are for the right basket.
4. When the timer(s) time out, a beeper sounds, REMOVE # is displayed in the window and the timer
number flashes. Press the flashing timer number to silence the beeper.
Models With Basket Lift Option
1. Place the fry basket(s) on the lift arm.
2. Load the fry basket(s), do not overfill.
3. Press the desired number to start the timer. Timers
through are for the left basket and
through are for the right basket.
4. When the timer(s) time out, a beeper sounds and REMOVE # is displayed in the window. The timer
number flashes and the basket(s) automatically raise. Press the flashing timer number to silence
the beeper.
NOTE: To cancel a timer after it has started, press and hold the timer number for 5 seconds.
SHUTDOWN
1. Press the power switch off.
2. For models with electronic ignition, turn the gas valve extension arm to OFF.
EXTENDED SHUTDOWN
1. Turn the main gas shutoff valve off.
2. Press the power switch off.
3. Unplug the fryer.
4. Turn the gas valve extension arm to OFF.
5. Drain the fryer.
6. Allow the fryer to cool, then apply a thin coat of cooking oil to tank interior and tank back to prevent
rust.