Hobart HGFD35 ML-126416 Fryer User Manual


 
31
DAILY FILTERING
WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING,
CLEANING AND SERVICING THE FRYER.
Filtering Guidelines (All Models)
Stand alone fryers are available in filter-ready and non-filter-ready versions.
Battery interplumbing is available only on fryers equipped with Filter-In-A-Drawer.
A cold fryer will not drain properly. Always filter shortening in a liquid state. The shortening under
the cold zone area will remain hard, even if the heat is on for a few minutes. If necessary, use
the cleanout rod to carefully stir the hard shortening to an area above the cold zone (Fig. 7)
where it will melt.
Filter shortening at least once a day (see Shortening Life on page 33).
Fig. 7
Filter-Ready Fryers (For Use With Mobile Filter Only)
The Mobile Filter is covered in a separate instruction manual. Follow the instructions accordingly.
OIL LEVEL
COLD ZONE
PL-50580