Hobart HL662 - 60 Quart Pizza Maker Mixer User Manual


 
LEGACY
®
HL662 PIZZA MIXER
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
F40034 – Legacy
®
HL662 Pizza Mixer Page 3 of 4
SPECIFICATIONS
MOTOR:
2.7 H.P. high torque motor.
200-240/50/60/3/1 18.0 (1 Phase) Amps
10.0 (3 Phase) Amps
380-460/50/60/3 6.5 Amps
ELECTRICAL:
200-240/50/60/3/1, 380-460/50/60/3 – UL Listed.
CONTROLS:
Magnetic contactor with thermal overload protection.
Internally sealed “Start-Stop” and Power Bowl Lift
push buttons. Reduced voltage pilot circuit trans-
former is supplied for 380-460/50/60/3 machines.
A 50-minute SmartTimer™ is standard. SmartTimer™
includes Automatic Time Recall, which remembers
the last time set for each speed.
TRANSMISSION:
A rated 5.4 H.P. poly-V belt transfers power from
motor to the input shaft then geared down to desired
reduction with a constant gear mesh. Gears and
shafts are heat-treated hardened alloy steel along
with anti-friction ball bearings. Circulating oil and
grease lubricants furnished to all gears and shafts.
SPEEDS:
Agitator Attachment
(RPM) (RPM)
First 56 111
Second 99 196
Grind Meat 212
Cheese Shred 355
Vegetable Slice 700
BOWL GUARD:
Heavy-duty stainless steel wire front and solid
stainless steel rear portion. Front portion of guard
rotates easily to add ingredients and install or
remove agitator. It detaches in seconds for cleaning
in dishwasher or sink. Rear portion of guard can be
quickly cleaned in position. Guard must be in closed
position before mixer will operate. Bowl support
interlock provides further protection.
POWER BOWL LIFT:
Powered by an electric motor, the bowl may be raised
or lowered by ngertip control through the conveniently
located switch. Bowl will remain in position until switch
is activated. Stir-on-Lift Feature: Allows the agitator
to run in Stir Speed while the mixer bowl is being
raised. Once the bowl is in the raised position, the
mixer automatically shifts into the preselected speed.
FINISH:
Metallic Gray Hybrid Powder Coat nish.
FOOTPADS:
Neoprene footpads are standard.
ATTACHMENT HUB:
Comes with front-mounted Hobart standard #12 taper
attachment hub for use with #12 size attachments.
ATTACHMENTS AND ACCESSORIES:
The following are available at extra cost:
Stainless Steel Bowl
“B” Flat Beater
“C” Wing Whip
“D” Wire Whip
“ED” Dough Hook
“P” Pastry Knife
“I” Heavy Duty Wire Whip
Listed by Underwriters Laboratories Inc. and certied by NSF
International.
Hobart Ingredient Chute
Bowl Extension Ring
Bowl Splash Cover
Bowl Truck
40 Quart Accessories
Ingredient Chute
9" Vegetable Slicer
Meat Chopper Attachment