Hobart KA7EM Oven User Manual


 
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
Page 4 of 4 F-40287 – KA7EM Electric Rotary Oven
As continued product improvement is a policy of Hobart, specications are subject to change without notice.
KA7EM ELECTRIC
ROTARY OVEN
F-40287 (REV. 01/11) LITHO IN U.S.A. (H-01)
SPECIFICATIONS:
CAPACITY: KA7EM: 28-35 chickens.
Stacked units are mounted on nylon casters. Countertop
units mounted on adjustable legs – 4" to 6".
Top-mounted fans draw air from bottom of oven cavity over
the top mounted heating elements browning product evenly
on all sides.
Cavity illuminuated with 500W long-life lamp.
Spit motor rotates at 2 RPM.
Stacked units must be wired independently.
CONSTRUCTION: Outer shell is stainless steel. 1" Rock-
wool insulation is applied to top and sides. Doors mounted
on front and back (optional) feature large, full sized tem-
pered glass for high visual impact. Solid stainless steel
back is standard. Each door swings open 180°. Spits are
easy to remove without the use of tools for product removal
and to facilitate cleaning. Oven interior is stainless steel.
Pull handle on front of machine allows for easy grease dis-
posal. Large grease sump also holds wash water for easy
end of day cleanup. Grease and wash water disposal port
utility connection is located on right side of machine. Au-
tomatic grease assist pump option continuously removes
grease during cook into receptacle through right side utility
port connection.
CONTROLS: Standard conguration has 500 W lamp.
Operator controls located on the right side panel.
IMPORTANT: Steam generated from normal operation
may escape from the door. Wood laminate, veneers, etc.
are unsuitable materials for use in areas exposed to oven
steam. Stainless steel or other moisture-resistant shields
are recommended for surfaces adjacent to KA7EM sides
and top.
Approx.
WEIGHT: Net. Wt. Ship Wt.
STANDO-KA7E 80 120
STAND-KA7E 130 170
KA7EM – Solid Back 385 425
KA7EM – Glass Back 405 445
(accessories shipped separately)
KA7EM
shown with pass-thru option
KA7EM/KA7EM
shown with
stacking kit accessory
KA7EM
shown with
stand accessory