Filter
Top Products
8 •
MB OWNER/OPERATOR MANUAL
weekly, but possibly sooner if needed, to maintain lubrication. Once oil has been put in the cups,
close them by turning clockwise.
To prevent product contamination, only use USDA authorized oil. Note:
USDA authorized Berkel oil is available in 2 ounce (4675-00182),
16 ounce (4675-00183), and 1 gallon (4675-00184) containers.
TROUBLESHOOTING
ELECTRICAL FAILURE
1. Is the pilot light illuminated?
• Is the power cord completely plugged into the wall outlet?
• Check the power cord for cuts or breaks.
• Are you getting electricity from the wall outlet? Check by plugging in another piece of
equipment with the same electrical requirements. Also, check the circuit breaker or fuse.
2. Is the master power switch in the “ON” position?
3. Have you lifted the operating lever as far as possible?
BREAD NOT CUTTING PROPERLY
1. Is the bread rack clear of all foreign material?
2. Are the blades dull or broken? If so, have the blades replaced by your local Designated Berkel
Service Location.
3. Does it appear as though the blade rack assembly is falling too fast or slow for the product you
are slicing? If so, contact your nearest local Designated Berkel Service Location.
MOTOR RUNS BUT NO BLADE MOVEMENT
1. Broken drive belt. Have the drive belt replaced or adjusted by your local Designated Berkel
Service Location.
If the correction of any of the above conditions does not result in a functional bread slicer, call your
Designated Berkel Service Location.
REPAIR PARTS/REPAIR SERVICE
Please contact your Designated Berkel Service Location for any repair parts and/or repair service
required on your Berkel grinder. Additional information may be obtained from:
Service Support Center
Berkel Company
4406 Technology Drive
South Bend, Indiana 46628-9700
574/232-8222 · (800) 348-0251 · Fax 574/232-8116
WARNING
Berkel MB Bread Slicer Technical Manual Page 14 of 35