Filter
Top Products
— 3 —
Installation, Operation and Care of
MODEL HFD/HFC SERIES ELECTRIC FRYERS
SAVE THESE INSTRUCTIONS FOR FUTURE USE
GENERAL
Hobart HFD/HFC Series Electric Fryers are available in 3 sizes with an array of features and options
for a range of commercial fryer applications. While the overall tank width on the HF40 and HF50 are
the same, the HF50 has a deeper tank area than the HF40.
Width Fry Compound
Model KW inches cm Lb. kg
HFD/HFC40 14 & 17 15.5 39.3 35-40 15-18
HFD/HFC50 14, 17 & 21 15.5 39.3 45-50 15-18
HFD/HFC225 14, 17 & 21 15.5 39.3 25 11
HFD/HFC85 24 21.0 53.3 70-85 31-38
Voltage ranges are: 208/240, 3 Phase
220/380, 3 Phase, 4 Wire
240/415, 3 Phase, 4 Wire
480, 3 Phase.
Model HF Series Fryers can be free standing or arranged in batteries of 2 to 5 fryers. The number
preceding the model number of your fryer refers to the number of fryers in a battery. One fryer in a
battery can be a Frymate Dump Station (HFO15 for HF40 and HF50, HFO21 for HF85) (only one per
battery).
HFD Fryers have a solid state thermostat and HFC Fryers have a microprocessor (computer)
thermostat and timer control.
Feature options include Basket Lift(s) with Timer(s); Tri, Twin, or Single Baskets; Filter Ready and
Battery Interplumbing. Finish options include S/S Sides and Casters. S/S Legs are standard.
Your Hobart fryer is constructed and designed to give long satisfactory service, providing it is properly
installed, adjusted and maintained.
The Mobile Filter is covered under a separate Installation and Operation Manual.