Filter
Top Products
– 4 –
ATADLACIRTCELE
ledoMesahP/ztreH/stloV
esuFyaleD-emiTtnemelElauDrekaerBtiucriCemiTesrevnI
muminiM
tiucriC
yticapmA
SPMA
mumixaM
eziSesuF
SPMA
06
o
C
reppoC
eziSeriW
muminiM
tiucriC
yticapmA
SPMA
mumixaM
tiucriC
eziSrekaerB
SPMA
06
o
C
reppoC
eziSeriW
2374
A2374
1/06/002030301#54546#
1/06/032030301#54546#
3/06/002515141#525201#
3/06/032515141#525201#
3/06/064510141#510141#
.2002,edoClacirtcelElanoitaNehthtiwecnadroccanidelipmoC
ELECTRICAL CONNECTION
WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE
APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER
LOCAL ELECTRICAL CODES.
WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE
DISCONNECT SWITCH INDICATING THE CIRCUIT IS BEING WORKED ON.
The junction box is tapped for
3
/4" trade size conduit and may be rotated 180
o
for convenience of
installation.
THREE PHASE MACHINES
Three phase machines must be connected so that the attachment drive runs counterclockwise when
facing the hub. To check the direction of rotation, turn the chopper on momentarily. If rotation is not
correct, DISCONNECT ELECTRICAL POWER SUPPLY and interchange any two ot the incoming
power supply leads. Reconnect power to the chopper. Turn the chopper on momentarily to verify
correct motor rotation.
OPERATION
WARNING: DO NOT OPERATE WITHOUT GUARD OVER FEED OPENING. DO NOT PUT HANDS
INTO FEED OPENING. USE FEED STOMPER.
After cleaning, assemble chopper Cylinder, Worm, Knife, Plate and Adjusting Ring (and Feed Pan on
model 4732A) as discussed in CLEANING, page 7, and Fig. 3 or Fig. 4. Place the Deflector over the
Adjusting Ring.
• To start the chopper, pull the Start-Stop Switch Knob (Fig. 3 or Fig. 4).
• To stop the chopper, push the Start-Stop Switch Knob.
The fineness of cut depends on the hole size of the chopper's Plate. The Knife and Plate must be kept
clean and sharp for a fine cut. The tightness of the Adjusting Ring does not regulate fineness of cut;
therefore only moderate tightness is recommended. The Adjusting Ring should be only hand-tight.