Filter
Top Products
– 8 –
BOWL GUARD
Bowl guard must be in position and closed in order to mix. If bowl guard is opened during the mixing,
mixer will stop.
REMOVE BOWL GUARD
Lower the bowl support and remove agitator before removing bowl guard. Hold bowl guard with both
hands and pull downward gently to release bowl guard from retainer (Fig. 5).
INSTALL BOWL GUARD
Hold bowl guard with both hands and gently push upward until bowl guard is latched on the retainer
and can be rotated freely (Fig. 5).
CLEANING
Unplug machine power cord before beginning any cleaning procedures.
The mixer should be thoroughly cleaned daily.
Bowls and agitators should be removed from the mixer and cleaned in a sink.
DO NOT use a hose to clean the mixer — it should be washed with a clean damp cloth.
Clean the Bowl Guard by wiping with a cloth or sponge and warm soapy water.