Honeywell and 5380 Frozen Dessert Maker User Manual


 
3 - 1
3
Enumerated Types and Definitions
Error Codes
RESULT_INTIALIZE = -1 Initial error code value.
RESULT_SUCCESS = 0 Operation was successful.
RESULT_EOT = 256 Undefined error.
RESULT_ERR_BADFILENAME Bad file name.
RESULT_ERR_BADINTELIMAGE Part of image window outside barcode image boundaries.
RESULT_ERR_BADPORT Invalid connection specified.
RESULT_ERR_BADREGION Invalid image window.
RESULT_ERR_BADSMARTIMAGE The device did not capture a valid image for intelligent imaging.
RESULT_ERR_BAUD_TOO_HIGH Requested baud rate not supported by host port.
RESULT_ERR_BUFFER_TOO_SMALL Buffer passed in to small for output.
RESULT_ERR_CAPTURE_IMAGE_FAILED Imager failed to capture the image.
RESULT_ERR_COMPRESSION_FAILED Error compressing image data.
RESULT_ERR_CONNECT_BOOT_CODE Imager connected but is running in boot code.
RESULT_ERR_DECOMPRESSION_FAILED Error decompressing image data.
RESULT_ERR_DLL_FILE Dll file specified to SetHardwareDllFileName not found.
RESULT_ERR_DRIVER Communication error/no response.
RESULT_ERR_ENGINEBUSY The scan engine temporarily busy.
RESULT_ERR_FILE Error occurred during a file operation.
RESULT_ERR_FILEINCOMPATIBLE The selected file is incompatible with the imager.
RESULT_ERR_FILEINVALID The selected file is invalid or corrupt.
RESULT_ERR_INTERNAL_ERROR Generic internal failure.
RESULT_ERR_INVALID_COMM_PARAMS Invalid RS-232 parameters specified.
RESULT_ERR_MEMORY Out of memory/memory allocation failed.
RESULT_ERR_MENUDECODE Symbol decoded is a menu symbol.
RESULT_ERR_NAK Received a NAK on response.
RESULT_ERR_NODECODE No decode: timed out or no more trigger.
RESULT_ERR_NODRIVER Communication initialization failed.
RESULT_ERR_NOIMAGE hhpGetLastImage called but no image available.
RESULT_ERR_NOINTELBARCODE No decode during intelligent image capture.
RESULT_ERR_NOINTELIMAGE Error on retrieve intelligent image from imager.
RESULT_ERR_NORESPONSE Imager did not acknowledge request.
RESULT_ERR_NOTCONNECTED Imager not yet connected.
RESULT_ERR_NOTRIGGER During wait for decode, checks that trigger return is released.
RESULT_ERR_PARAMETER One of the function parameters was invalid.
RESULT_ERR_POLLEVENT Error configuring transfer thread.
RESULT_ERR_READTHREAD_START Error starting asynchronous transfer thread.
RESULT_ERR_READTHREAD_STOP Error stopping asynchronous transfer thread.
RESULT_ERR_REFLASH Engine firmware is corrupt.