Honeywell HR150 Ventilation Hood User Manual


 
HR150 AND HR200 Perfect Window™ FRESH AIR VENTILATION SYSTEMS
11 69-0994—4
Troubleshooting
Lack of power to the ventilator:
power failure of electrical box.
loose or unplugged power cord.
faulty breaker or fuse in home’s electrical panel.
call your installation contractor.
Power to the ventilator, but no fan operation:
ventilator is in standby mode and optional remote dehumidistat is set to OFF or the
humidity setting is higher than room humidity.
door Is not closed properly, the safety interlock switch will keep the ventilator off.
Check that the access door is firmly closed and latched.
refer to operating instructions.
call your installation contractor for service.
Lack of Speed Control:
let the remote device continue its time setting or manually adjust it to gain speed
control.
test the speed control on the ventilator by turning the variable speed control knob to
its highest setting.
call your installation contractor for service.