Filter
Top Products
21
20
EN 50242 place load
Capacity with pans and dishes
Water supply pressure
Fuse
Power input
Supply voltage
15
9 persons
Min. 0,08 - Max 0,8 MPa
(see rating plate)
(see rating plate)
(see rating plate)
DESCRIPTION OF THE CONTROL PANEL
TECHNICAL DATA:
DIMENSIONS:
Height
Depth
Width
Depth with door open
A
DIGITAL DISPLAY
B
"PROGRAMME SELECTION" button
C "DELAY START" button
D
"SUPER ECO" option button
E "ACTION PRO" buttons
F "START"/"RESET" button
(start/cancelling programme)
G "DELAY START" indicator light
H
"OPTION SELECTION" light
I "ACTION PRO" lights
L "SALT EMPTY" light
M
"RINSE AID EMPTY" light
N Programme guide
O "ON/OFF" button
cm
cm
cm
cm
82 ÷ 90
55
59,8
117
ABCD E FM
N
O
LGH I
PROGRAMME SELECTION
AND SPECIAL FUNCTIONS
(Use in conjunction with programme guide)
IMPORTANT
The dishwasher has two very practical
functions:
- the "recommended" programme
(which is set in the factory and is
ideal for full-load daily use) for quick
and accurate selection;
- the memory function which saves
the last programme used, so that if
you regularly use the same washing
cycle, you do not have to re-set the
programme every time, thereby
saving time and effort.
"ACTION PRO" buttons
These buttons allows you to modify the
wash intensity, according to how dirty your
dishes are, by modifying the wash time
and temperature.
Pressing the button the intensity of
wash will be increased, pressing the
button the intensity of wash will be
reduced and the wash time will be
remarkably shorter.
The combination of the buttons with the 4
main wash programmes enable to have 8
additional wash cycles (achieving a total of
12 programmes of washing).
IMPORTANT
When the dishwasher is switched on,
the setting last used will be indicated.
Programme settings
■ Open the door and place the dirty dishes
inside the appliance.
■ Press the "ON/OFF" button . The
display will show the "recommended"
programme, or the last programme
used.
■ To set another programme, press the
"PROGRAMME SELECTION" button
("PROGR.").
■ If you wish, press the "ACTION PRO +"
or "ACTION PRO –" button.
■ If you wish, press the option button (the
corresponding indicator light will turn on).
The option button can be selected or
deselected WITHIN one minute of the
programme commencing.
■ Press the "START" button.
The length of the program will be shown on
the display alternating hours with minutes
[I.e.: 1 h (1 hour) / 25 (25 minutes)].
■ Close the door (after an audible signal
has sounded, the programme will start
automatically).
WHITIN one minute of the programme
commencing, another programme
can be selected, by pressing the
"PROGRAMME SELECTION" button
(it is also possible to select or deselect
the "ACTION PRO" buttons).
“AUTOMATIC” programmes
The dishwasher is equipped with a dirt
sensor, able to analyse water murkiness
during all "AUTOMATIC" programme
phases (see programme list); thanks to
this sensor the washing cycle parameters
are automatically adapted to the real
quantity of dirt on dishes. Thus excellent
washing results are guaranteed while
optimising water and energy consumption.