Filter
Top Products
- 11
• Locate the sign corresponding to the cooking zone that you need :
rear rear front front
right left left right
Each surface unit is regulated by a control knob which provides access to any
power levels.
• It is recommended that heat setting is at its highest until it has properly warmed
up and then lower to the desired cooking setting.
• The residual heat indicator lights up when the heat zone temperature reaches
60°C and above. It will stay on, even if the unit is switched off, until the surface
has cooled down.
It will switch off when the temperature of the heat zone falls below 60°C.
• To switch off an heat zone, turn the corresponding knob back on the "0" setting.
• Positions : the examples below are intended as a guide. When you become
familiar with using your hob you will be able to work out the settings which suit
you best.
HOW TO OPERATE THE GLASS CERAMIC HOB
snoitisoP.....spitemoS
1
wolyreV
...etalocohcdnarettubtlem,tohhsidapeekoT
2
woL
...sggedehcaop,gniddupecir,swets,secuas,gnikoocwolS
3
yletaredoM
...retawgniliob,tiurf,sdoofnezorf,snaeB
4
muideM
...hsif,seperc,atsap,selbategevhserf,selppademaetS
5
hgiH
....skaets,settelemo,gnikoocesnetnieroM
6
hgihyreV
...gniyrf,spohc,skaetS